Energy · Measurement · Control

Energy management

We connect solar, storage, EV charging and heat through reliable measurement, understandable priorities and defined safe states.

Battery storage and inverter in a plant room

Direct answer

Energy management decides where each kWh goes: direct use, battery, car, heat or grid. Sound measurements and fallback rules matter more than flashy automation.

01

Measure correctly

Generation, grid import/export, battery state and flexible loads must be measured at the correct point and updated quickly enough.

  • Grid-flow direction
  • PV power and state of charge
  • Temperature and enable signals
02

Set priorities

Together we decide which load comes first and which reserves remain. Rules can change with season, tariff or vehicle availability.

  • Direct use first
  • Minimum battery reserve
  • EV and heat as flexible loads
03

Use robust interfaces

Modbus, digital contacts, APIs and proprietary systems all have limits. We verify compatibility and behaviour when communication fails.

  • Documented compatibility
  • Safe local control
  • Planned expandability
04

Optimise with real data

After commissioning, thresholds and delays are compared with actual operation. Small changes can improve self-consumption and comfort.

  • Review deviations
  • Tune thresholds
  • Useful, actionable alarms

Project process

From first idea to stable operation.

  1. 01Map sources and loads
  2. 02Define priorities and limits
  3. 03Integrate meters and controls
  4. 04Test faults and optimise

FAQ

Frequently asked questions

Must everything be one brand?+

Not necessarily, but interfaces must be documented and stable. We verify the exact product combination before promising functions.

Can Home Assistant be integrated?+

Yes, where suitable interfaces exist. Safety functions remain independent of the higher-level smart-home logic.

What happens without internet?+

Essential functions should move to a defined local state. Any cloud-dependent convenience features are clarified during design.

Next step

Your energy system starts with a clear plan.

For an initial assessment, send the address, annual consumption and photos of the roof, meter board and plant room.